Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Ontario, CA
Baron Gate Repair installs automatic, sliding, and swing gates throughout Ontario, and we’ve been doing it since 2017. The city’s mix of 1950s tract housing, newer planned communities, and a dense warehouse belt means gate jobs here rarely look the same twice. You may have an original wrought-iron driveway gate sagging on shifted posts in 91761, or a steel slide gate on a concrete pad in a post-1980s subdivision off Ontario Ranch Road. We work on the brand you already own, and we quote every installation before the first tool leaves the truck. Call (877) 752-1896 for a free estimate.
Why Ontario Homes Are Different
Ontario sits in the Santa Ana wind corridor where gusts funnel through the Cajon Pass and slam driveway gates with repetitive side loading. The older residential core around the 91761 and 91762 ZIP codes is mostly mid-century tract homes with original chain-link and wrought-iron gates hung on posts set directly into expansive Inland Empire clay. After a wet winter, that clay swells and shifts, and a gate that latched fine in September drags by February. It’s a footing problem, not a hinge problem, and replacing hardware without addressing the post won’t hold a season.
The warehouse belt north of Interstate 10 and around the Ontario International Airport area is a different animal. We service heavy commercial slide gates, cantilever gates, and access-controlled barriers there, where traffic cycles are constant and operators run hundreds of times a day. Between the two zones, an Ontario gate company has to be fluent in both residential ornamental work and commercial-grade automation. That’s exactly what Baron Gate Repair does. No other trade split. Just gates.
Styles & brands we work with
Our Main Ontario Services
Most Ontario homeowners and property managers call us for two reasons: a gate that stopped moving, or a gate that never worked right in the first place. Here’s how each works.
Gate Repair in Ontario
A driveway gate in Ontario fails in predictable ways: wind-fatigued hinges, a latch that won’t catch because the post has shifted, a chain-drive operator with slack from repeated gust loading. We see these across the older neighborhoods near downtown and up through 91764, where original iron work has decades of sun and Santa Ana exposure on it. Whether it’s a Mighty Mule on a ranch gate or a Viking on a commercial curb cut, our technicians diagnose the full gate: hinges, post footings, rails, wheels, and operator. Diagnosed and fixed in one visit is the standard we work to. See Gate Repair in Ontario for the full scope.
Electric Gate Repair in Ontario
When an automated gate stops responding in Ontario, the culprit is often the control board, a loop detector, a photo eye misaligned by wind, or a motor burned out from fighting a gate that drags on a shifted post. We repair FAAC, BFT, LiftMaster, Linear, and Viking automation, and we don’t swap a board without checking the mechanical load first. An opener that died because the gate binds is going to kill the next opener too. From the motor to the hinge, we fix the cause. Details are on our Electric Gate Repair in Ontario page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Ontario
Installing a gate in Ontario means designing for wind, soil movement, and daily use patterns that vary block by block. A slide gate on a concrete pad in a newer subdivision handles differently than a swing gate on posts set into expansive clay in an older tract. We measure the opening, assess the footing and grade, and recommend an operator matched to the gate’s weight and duty cycle. Every installation includes a written quote approved before work begins. Call (877) 752-1896 to schedule a free measure. For a detailed breakdown of what installation involves, see our Gate Installation service hub.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open a gate that should open itself, or your current operator is dead and the gate is worth automating rather than replacing.
What it costs in Ontario
Automatic gate installation in Ontario typically runs $2,500 – $6,500 for residential operators and can exceed $10,000 for commercial duty systems on heavy slide gates.
How we do it
We set or verify the posts and footing, mount the operator and arm, run power to the motor, install safety photo eyes and loop detectors where required, then cycle-test the gate under load.
Driveway Gate Installation
Signs you need it
Your existing gate is rusted through, too heavy for its posts, or you want a wider opening for a second car or trailer access.
What it costs in Ontario
A new driveway gate in Ontario typically ranges from $3,000 – $8,000 depending on material, width, and whether it’s a single-swing, double-swing, or slide design.
How we do it
We survey the driveway grade and soil, set posts or a concrete pad rated for the gate weight, hang and align the gate, then install and program the operator with safety edges and sensors.
Sliding Gate Installation
Signs you need it
Your driveway slopes or lacks the swing clearance for a gate that arcs open, or you need a wider opening than a swing gate can carry without heavy posts.
What it costs in Ontario
Sliding gate installation in Ontario starts around $4,000 and commonly lands between $5,000 – $9,000 including the track, wheels, cantilever hardware if needed, and operator.
How we do it
We pour or verify a level pad, set the track and guides, install the gate frame and panels, attach the operator and rack, and tune the limit switches and safety loop.
What Gate Installation Costs in Ontario
| Item | Typical range in Ontario |
|---|---|
| Residential gate operator | $2,500 – $6,500 |
| New driveway gate (materials and install) | $3,000 – $8,000 |
| Sliding gate system with operator | $5,000 – $9,000 |
Ontario prices cluster higher when the job runs on commercial duty cycles, long cantilever slides, or post footings that must be re-engineered in expansive soil. We quote every installation up front and you approve the number before work starts.
Do I need a permit to install a gate in Ontario?
In Ontario, a driveway gate on private residential property usually falls under general fencing and accessory-structure rules, but automated gates with vehicle loops or street-adjacent posts may require a city permit. We confirm Ontario’s current requirements before your install date.
Can you install a gate if my existing posts have shifted?
Yes. On older Ontario lots where expansive clay has tilted the posts, we pull and re-set them with deeper footings and proper drainage, or we convert the opening to a slide gate on a pad. The fix is a footing correction first, hardware second.
Brands We Service in Ontario
We service FAAC, BFT, Linear, and Viking systems across Ontario, from estate gates to industrial curb cuts. Common boards, limit switches, and safety-edge components for these brands are stocked on our trucks, so most Ontario calls wrap up in a single visit rather than a parts-order loop. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Ontario, CA
| Service | Typical range in Ontario |
|---|---|
| Gate repair | $150 – $500 |
| Electric gate repair | $200 – $800 |
| Circuit board replacement | $350 – $1,000 |
| Gate opener repair | $250 – $700 |
| Gate opener replacement | $700 – $2,500 |
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $3,000 – $8,000 |
| Sliding gate installation | $5,000 – $9,000 |
| Gate post reset / footing repair | $400 – $1,500 |
| Gate hinge and wheel replacement | $150 – $600 |
Two things push an Ontario gate bill upward: posts that have shifted in expansive soil and need re-setting, and heavy wind cycles that have fatigued multiple hardware points at once. Whatever the job, we quote a fixed price before work begins and we don’t bill above it without your say-so.
Neighborhoods We Serve in Ontario
We work every Ontario ZIP code we cover: 91758, 91761, 91762, and 91764. That spans the older grid near downtown, the mid-century tracts east of Euclid Avenue, the newer builds south of the 60, and the commercial edges around the airport and warehouse corridor. Response windows vary by call volume and parts availability, but most Ontario repairs are scheduled within a day or two, and true emergency gate failures get priority when we’re running multiple jobs.
- Downtown Ontario (91761, 91762)
- Ontario Ranch area (91758)
- East Euclid tract neighborhoods (91764)
- Airport-adjacent commercial district
Service Area – Cities Near Ontario
Baron Gate Repair covers Ontario and the surrounding Inland Empire cities. We regularly run calls into Montclair, CA for older iron driveway gates, Upland, CA for estate and hillside gate systems, Chino, CA for ranch and equestrian gates, and Claremont, CA for mid-century homes with original hardware. Same crews, same gate-only focus.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ontario
Most Ontario repair calls are scheduled within one to two days. If a gate is stuck open or won’t close at all, we treat it as an urgent job and move it up the queue when we’re already working in the 91761 or 91762 areas. Call (877) 752-1896 and we’ll tell you the current window.
Yes. Several planned communities and newer subdivisions in Ontario have HOA design rules covering gate height, color, material, and whether the operator can be mounted above the fence line. We install to your association’s written spec and can work with your property manager on submittal details.
We do. Ontario’s industrial belt runs heavy cantilever slide gates, barrier arms, and access-controlled operators that cycle constantly. We service DoorKing, Viking, Linear, and LiftMaster commercial automation, and we stock common boards and safety components for these systems on our trucks.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ontario Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Eric Wong"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Maria Herrera"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Lucia Guzman