Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pomona
If your gate is sagging, stuck, or refusing to open after the last wind storm, you need a technician who understands exactly how Pomona’s older homes and Santa Ana gusts put strain on hinges, posts, and operators. A typical gate repair in Pomona runs between $185 and $540 depending on the failure, and most jobs are diagnosed and fixed in one visit. We’re Baron Gate Repair, a gate-only specialist crew based in nearby Corona, and we work on the brand you already have, from a Mighty Mule on a Ganesha Hills driveway to a LiftMaster on a Phillips Ranch estate. Call (877) 752-1896 for a straight answer on what your gate needs.
Why Baron Gate Repair Is Pomona’s Preferred Gate Repair Company
Pomona homeowners call us because most other companies split their time between garage doors, fencing, and a dozen other trades. We don’t. Every technician on our crew works exclusively on gate mechanics, electronics, and structure, so when we show up to a 1950s tract home off Holt Avenue or a commercial property near the Fairplex, we carry the right parts and recognize the equipment on sight. That focus shows up in how fast we work and how rarely we have to come back.
Our service area covers all of Pomona, including the 91766, 91767, 91768, and 91769 ZIP codes. We see the same failure patterns across the city: sagging hinge posts on shared driveways, sliding gate tracks knocked out of alignment, and latches forced by wind. Because we’re based just down the 71, we can dispatch to Pomona quickly when a gate fails and traffic can’t wait. Nolan Briggs, who runs Baron Gate Repair, has built the crew around a simple principle: diagnose the actual cause the first time, not just the symptom. Pomona customers respond to that.
Styles & brands we work with
Gate Welding in Pomona
Gate Welding in Pomona is often the difference between a repair that lasts and a patch that fails again in six months. Older wrought-iron gates across Pomona, especially on the east and south sides built between the 1950s and 1970s, develop stress cracks at hinge points and where the frame meets the pickets. When a Santa Ana wind slams a gate against its stop, those hairline cracks become outright breaks. We weld the cracked joint, reinforce the surrounding frame, and grind it back smooth before painting or priming so the repair doesn’t just hold, it blends.
Pomona gate welding work typically runs $220 to $580, depending on the extent of the crack and whether we need to remove the gate leaf or can weld in place. We quote the price before any work starts.
Cracked Frames and Broken Hinges
Most welding calls on Pomona’s older iron gates start with a hinge that tore loose from the frame. The metal around the hinge was fatigued long before the wind gave it the final push. We cut away the cracked material, weld in a fresh hinge plate, and re-hang the gate so it swings true.
Structural Reinforcement
When a gate has been welded repeatedly or the original frame was thin, simply patching the crack isn’t enough. We add a reinforcing plate or a cross-brace so the frame resists twisting, which matters on Pomona properties where wind exposure is constant and not seasonal like the coast.
Commercial Gate Repair in Pomona
Commercial Gate Repair in Pomona means working around operating hours, traffic flow, and access control systems that can’t go down for long. We service automated gates at warehouses off Mission Boulevard, industrial yards near the 60 Freeway, and smaller commercial properties downtown. The equipment is often DoorKing or LiftMaster, both of which we know from years of daily work, and the failure is frequently a limit switch, loop detector, or a chain that’s jumped the sprocket after heavy use.
Commercial gate repairs in Pomona typically start at $350 and can run to $1,100 or more depending on the operator and what’s failed. Every price is agreed before we order parts, let alone start the work. We also coordinate with property managers to keep one lane or a pedestrian gate working while we fix the primary entry.
Access Control and Operator Repair
When a commercial gate won’t open from the keypad or the vehicle loop isn’t detecting, the problem usually sits in the control board or a misaligned safety sensor. We trace the circuit, not guess at it, and we stock common replacement boards and loop detectors for the brands Pomona properties actually run.
Heavy-Duty Sliding Gates
Sliding gates on commercial properties take enormous abuse from daily cycles. Pomona yards with limited frontage depend on a smooth rack and pinion. When the track gets fouled with debris or the gate binds, the motor burns out prematurely. We inspect the whole run, from the track to the motor, and correct the root cause.
Trusted Brands We Service in Pomona
We service nine gate brands across residential and commercial lines, which covers virtually any gate a Pomona property already has on it. That includes entry-level systems from Mighty Mule and Ghost Controls, the mid-range Linear and Elite operators found on many tract homes, and the commercial-standard equipment from DoorKing and LiftMaster. We also work regularly on FAAC and BFT systems on higher-end estates in the Ganesha Hills and Phillips Ranch neighborhoods. Because we carry common parts and control boards for these brands, we can often complete a Pomona repair on the first visit instead of ordering a part and coming back.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Pomona Homes
- Sagging gates on shared driveways. Pomona’s older neighborhoods, particularly east of Towne Avenue, often have shared driveways where the hinge post carries more than its share of lateral load. Old footings crack or shift, the gate drags, and the operator strains until it fails. We re-set the post and re-hang the gate rather than shimming it and hoping.
- Sliding gates on tight side yards. Many Pomona lots, especially on the south side, have side yards too narrow for a swing gate. The sliding gate that was installed instead eventually binds because the track shifts or the rack misaligns. Left alone, the motor burns itself up. We correct the alignment before the operator fails.
- Wind-damaged latches and hinges. After a Santa Ana event, we get a rush of calls from Pomona homeowners whose original wrought-iron or wood gates were never upgraded for the wind load. Latches get forced, hinge pins bend, and the gate no longer closes square. The fix often involves welding and a sturdier latch, not just a new pin.
- Operator failures on original equipment. Many 1950s and 1960s Pomona homes had an operator retrofitted years after the gate was built. Those older installations often sit on undersized electrical runs, and the control board eventually gives out. We check the whole chain: motor, board, limits, and wiring.
Pricing for Gate Repair in Pomona, CA
You should know what a repair costs before you agree to it. For gate repair in Pomona, CA, expect a hinge replacement or realignment to run $185 to $325, a latch or lock replacement $140 to $280, welding work $220 to $580, and a control board or operator repair $350 to $900 depending on the brand. Sliding gate track correction comes in around $275 to $550. The price is quoted and agreed before any work starts, and we don’t add surprise line items at the end. Call (877) 752-1896 for a free estimate on your specific gate.
We Also Serve Cities Near Pomona
Our Gate Repair crew covers the whole eastern San Gabriel Valley. In addition to work across Pomona, we regularly handle calls in Claremont, Montclair, Los Serranos, and Upland, so if you’re just outside city limits, we’re still close enough to reach you quickly.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pomona
Santa Ana winds hit Pomona from the north and northeast, loading gates sideways in a way normal use never does, so latches get forced and original hinges bend or tear from their tracks. Older homes with original wrought-iron or wood gates built in the 1950s through 1970s take the worst of it, especially on the east and south sides. If your gate shifts or sticks after a wind event, call (877) 752-1896 and we’ll get the problem pinned down before it gets worse.
Yes, we regularly repair and realign sliding gates on Pomona lots where side yards are too tight for a swing gate. The most common issue is a shifted track or a rack and pinion that has drifted out of alignment, which makes the gate bind and the motor strain. We correct the geometry, clean the track, and test the full travel so the gate runs quiet. Call us for a quote and we’ll come inspect what your specific set-up needs.
The most common cause of a sagging gate in Pomona is a hinge post that has pulled loose from a shallow or cracked footing, often made worse by years of wind load on original gates. Once the post moves, the gate drags, the hinges bind, and the operator works against the load until it burns out. We re-set the post in fresh concrete and re-hang the leaf so the gate works the way it should. Estimates are free, so call (877) 752-1896 to schedule an inspection.
Yes, we do commercial gate repair throughout Pomona, including properties near the Fairplex, along Mission Boulevard, and in the older industrial corridors downtown. We work on DoorKing and LiftMaster operators, loop detectors, safety edges, and heavy sliding gates, and we schedule around your operating hours so access keeps working while we fix the problem. Call us to discuss your property and we’ll put together a repair plan.
On properties where the driveway gate is the only vehicle access, we stage the repair so the gate can be dismounted, worked on, and re-hung the same day, keeping the pedestrian gate or a temporary access path open throughout. For commercial sites, we coordinate with the property manager to keep one entrance operational while the primary gate is being repaired. On one recent job at a 1960s tract home in the 91766 ZIP code off Towne Avenue, a Santa Ana wind had blown the original wrought-iron gate clean off its hinge post. The post footing was cracked, and the LiftMaster operator’s limit switch was out of adjustment. We re-set the post in fresh concrete, replaced the hinges, and recalibrated the operator. The gate has handled every wind since. Call (877) 752-1896 and we’ll keep your access working while we fix what’s broken.
Written by Nolan Briggs, Owner at Baron Gate Repair, serving Pomona and the eastern San Gabriel Valley with gate-only expertise.