Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pomona, CA
Gate installation in Pomona means working with homes built between 1905 and 1975, where original wrought-iron driveway gates and wooden side-yard gates have spent decades fighting Santa Ana winds and the eastern San Gabriel Valley’s dry heat. Whether you’re replacing a sagging gate on a craftsman bungalow near downtown or adding automation to a 1960s tract home on the east side, we install gates matched to the specific stresses of this city. Call (877) 752-1896 for a free estimate on gate installation in Pomona.
Why Pomona Homes Are Different
Pomona’s housing stock spans more than a century of construction styles, and each era brings its own gate problems. The early-1900s craftsman bungalows clustered around downtown often still have their original wrought-iron driveway gates, and while the craftsmanship was solid, the hardware was not built for the wind loads this part of the valley regularly sees. Wooden side-yard gates on these older properties develop sagging hinges as the posts settle, and the dry summer heat cracks the boards along the grain.
The 1950s through 1970s tract homes that dominate the east and south sides of Pomona present a different picture. Many of these were built with lighter steel tube gates that have since rusted at the weld points, particularly where sprinkler overspray hits the bottom rail. Properties near the Fairplex and the older industrial corridors along Mission Boulevard often have heavy-duty chain-link or security gates that see constant cycling and need more frequent hardware replacement.
Santa Ana wind events are the single biggest driver of gate repair calls we see in Pomona. A strong wind event will push unlatched gates hard enough to shear bolt heads, bend hinge plates, or blow a gate clean off its pins. Homes with original gates that were never upgraded for wind exposure are the most common victims. If your gate faces an open street or sits perpendicular to the prevailing wind, the hardware needs to be heavier than what a big-box kit provides.
Styles & brands we work with
Our Main Pomona Services
Most Pomona calls start with a gate that will not open or will not stay shut. These are the two services homeowners in this city reach for first.
Gate Repair in Pomona
Gate repair in Pomona usually comes down to hinge failure, latch damage, or structural sag on older wood and wrought-iron gates. On a mid-century tract home, we’re often re-welding a broken hinge plate or replacing a post that has rotted at ground level. On a craftsman bungalow, we’re more likely re-hanging a heavy iron gate that has settled and now drags on the driveway. The fix starts with a full hardware inspection so the problem is found once, not guessed at. Gate Repair in Pomona gets its own detailed page.
Electric Gate Repair in Pomona
Electric gate repair in Pomona covers everything from dead opener motors to control boards that have failed after a power surge, which is common during Santa Ana wind events when power lines take a beating. We also see loop detectors that stop sensing vehicles, safety sensors knocked out of alignment, and remote receivers that stop pairing. Our techs diagnose the specific brand and control board on site rather than swapping parts until something works. Electric Gate Repair in Pomona is covered in depth on its own page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pomona
New gate installation in Pomona often starts with an older gate that has finally failed beyond repair, or a homeowner who wants an automated driveway gate where a manual one has been for decades. The climate here is hard on both wood and steel, so we select materials and hardware sized for the Santa Ana wind loads and the summer heat that dries out boards and loosens fasteners. If you’re replacing or adding a gate in Pomona, the wrong material choice will have you calling someone back in five years. Learn more about what a full installation covers on our Gate Installation page.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags past the point where hinge adjustments hold, the frame is rotted or rusted through in more than one spot, or you want to switch from a manual swing gate to an automated system.
What it costs in Pomona
Driveway gate installation in Pomona typically runs $1,800 to $5,500 depending on the gate width, material, and whether automation is included.
How we do it
We remove the old gate and hardware, set new posts in concrete where needed, hang the new gate on heavy-duty hinges rated for the wind exposure, and align the latch or opener so it closes flush every cycle.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open a manual gate, you want controlled access to a driveway or business entry, or your current opener has failed and the gate itself is worth keeping.
What it costs in Pomona
Automatic gate installation in Pomona typically starts around $2,700 and runs up to $7,000 for a complete system with a new gate, opener, and safety components.
How we do it
We mount the opener, run power to the gate, install the control board and safety sensors, set the travel limits, and program remotes and keypads so the gate operates smoothly and reverses on obstruction.
Electric Gate Installation
Signs you need it
You need to automate an existing gate that was never built for power, or you’re replacing an old opener with a more reliable system on a gate that sees daily use.
What it costs in Pomona
Electric gate installation in Pomona ranges from $2,750 to $7,500 when it includes the opener, wiring, control board, and safety edges.
How we do it
We assess the gate’s weight and swing, select an opener rated for it, run the power and low-voltage wiring in conduit, mount and program the control board, and test the safety reversal before we leave.
What Gate Installation Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Manual driveway gate (wood or steel, installed) | $1,800 – $5,500 |
| Automatic gate system (gate + opener + safety) | $2,700 – $7,000 |
| Electric gate installation (existing gate, new opener) | $2,750 – $7,500 |
How long does gate installation take in Pomona?
Most driveway gate installations in Pomona are completed in one day from removal to final adjustment. Automatic systems with new power runs or substantial concrete work can take two days. We confirm the schedule before the work starts and do not leave the job until the gate cycles correctly.
Do I need a permit to install a gate in Pomona?
Most residential gate replacements in Pomona do not require a permit, but new automated gates may need electrical sign-off depending on the power run. We handle the work according to current code and will tell you before we start if your specific project needs city approval.
Brands We Service in Pomona
We work on the brand you already have. In Pomona that means a lot of DoorKing and LiftMaster openers on commercial properties, Mighty Mule systems on residential driveway gates, and Elite operators on larger estate gates. Our techs stock common control boards, safety edges, and remotes for these systems locally so most repairs are diagnosed and fixed in one visit. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pomona, CA
| Service | Typical range in Pomona |
|---|---|
| Gate motor replacement | $650 – $2,600 |
| Driveway gate opener repair | $175 – $650 |
| Manual gate (wood or steel, installed) | $1,800 – $5,500 |
| Automatic gate system (gate + opener + safety) | $2,700 – $7,000 |
| Electric gate installation (existing gate, new opener) | $2,750 – $7,500 |
| Full gate replacement with power | $2,800 – $9,000 |
| Commercial gate operator service | $850 – $3,500 |
| Safety sensor replacement | $160 – $500 |
Prices in Pomona move up when a gate is oversized, the post footings need new concrete, or power has to be run more than 30 feet to the opener. The price you get upfront is the price you pay, and we quote and agree on the total before any work starts.
Neighborhoods We Serve in Pomona
We cover every zip code in Pomona: 91766, 91767, 91768, and 91769. That includes the older craftsman streets near downtown, the mid-century tract blocks east of Garey Avenue, and the industrial-adjacent properties around the Fairplex. Most calls within Pomona get same-day or next-day scheduling, and we do not route techs from across the county to make that happen.
- Lincoln Park
- Northside Pomona
- Phillips Ranch
- Westmont
- Ganesha Hills
Service Area – Cities Near Pomona
Baron Gate Repair serves Pomona and the surrounding cities in the eastern San Gabriel Valley and western Inland Empire. We regularly work in Claremont, CA, Montclair, CA, Los Serranos, CA, and Upland, CA. If you’re in any of those cities and need gate work, you’ll get the same specialist service without the long wait for a general contractor to fit you in.
Serving Pomona, CA — Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pomona
Most Pomona gate repair calls are scheduled same-day or next-day, depending on your location in the city and the nature of the failure. Gates that will not close or will not open are treated as priority calls, not routine appointments. Call (877) 752-1896 and we will give you a clear arrival window, not a four-hour guess.
Some Pomona neighborhoods, particularly planned communities like Phillips Ranch, have architectural guidelines that affect gate height, material, or color. We install to your HOA’s written specifications and will match the existing style when you are replacing a gate in a governed community.
Yes, we work on access-controlled gates at commercial and industrial properties throughout Pomona, including systems using DoorKing, LiftMaster, and Elite operators. These jobs often require higher-cycle components and safety loop detectors, which we stock and service directly.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pomona Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
— Sofia Reyes"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Diego Hernandez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Eric Wong