Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Fontana, CA | Baron Gate Repair
We provide independent Ghost Controls gate repair across Fontana, from the older tract streets of 92335 and 92336 to the newer subdivisions in 92337. What makes our Ghost Controls work here different is simple: a lot of the gate operators we’re called to fix aren’t actually bad. The motor’s fine. It’s the gate it’s bolted to that gave up, usually after decades of Fontana heat and one too many RV widenings. Call (877) 752-1896 and we’ll tell you which one you’re dealing with.
We service the full Ghost Controls line: Heavy-Duty Single Swing operators, Dual Swing kits, solar-ready residential swing arms, and the accessory boards, keypads, and backup batteries that keep them running. We’re not a garage-door company that also does gates. We’re gate specialists, and Ghost Controls is one of the brands we see most on Fontana driveways and side yards, along with our Pedley Ghost Controls service.
Why Fontana Residents Choose Us for Ghost Controls Service
We work on the brand you already have. Nolan Briggs, our owner, picked up his electrical and mechanical grounding at Norco College before spending the better part of three decades on anything with a hinge, a track, or a motor. That means when a Ghost Controls operator faults out in Fontana, we diagnose it from the field, not from a manufacturer script.
Our techs see Ghost Controls swing arms on a weekly basis. We know their limit-switch behavior, their solar-charge quirks, and exactly what happens to their battery banks when a Fontana summer parks triple-digit heat on a metal gate post for six straight weeks. We fit OEM Ghost Controls boards, arms, batteries, and receivers where compatibility matters, and we use quality aftermarket hinges and posts where they hold up better in this climate. Diagnosed and fixed in one visit is the standard we aim for, matching our Ghost Controls service in Sunnyslope.
And because we’re local, we know the difference between a Ghost Controls problem and a Fontana gate problem, just as we do with our Glen Avon Ghost Controls service. A lot of times, you can’t fix one without addressing the other.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in Fontana
- Battery banks that cook in late-afternoon heat. Solar and battery-backup Ghost Controls swing operators work fine in spring, then quit at 4 p.m. in July and August. The battery bank inside the control box gets heat-soaked against a south-facing gate post, loses capacity, and the gate stops mid-cycle. We test the panel output, load-test the batteries, and replace what’s dead with correctly sized backup batteries rated for high-ambient heat.
- Limit switches and control boards that misjudge travel after Santa Ana cycles. Fontana’s dry winds push dust into control housings and stress the travel-sensing components. A Ghost Controls operator that reverses halfway or stalls mid-swing often has a limit switch that’s drifted or a board that’s lost its travel reference. We reset, recalibrate, and replace boards when they’re truly fried from dust and thermal cycling.
- Seized hinges and sagging posts that overload a perfectly good operator. This is the big one in Fontana. The original side-yard gates on 1950s to 1980s tract homes weren’t built to carry a Ghost Controls arm, especially after homeowners widened them for RV or trailer access. The operator gets blamed when the real problem is a hinge that hasn’t moved freely in years or a post that’s rotted at ground level below the sprinkler line.
- Keypad and receiver boards failing from dust and sprinkler-driven corrosion. Gate posts in Fontana sit near turf sprinklers and collect fine desert dust. The keypad and remote receiver boards on Ghost Controls systems corrode at the connections, and the gate stops responding to remotes or codes. We clean, reseal, and replace receiver boards, then reposition or shield the enclosure so it doesn’t sit in the same moisture path again.
- Single-swing operators stalling on over-widened, RV-access gates. A Ghost Controls arm that keeps faulting on a widened side-yard gate in the older tracts is usually fighting a sagging gate leaf on undersized posts. We re-set posts, re-hang the gate square, and then reset the operator’s travel limits. The operator itself often needs nothing more than a fresh backup battery.
Ghost Controls Service in Fontana: What Local Conditions Mean for Your Equipment
This is the part that’s genuinely different about Fontana. In the older 92335 and 92336 tracts, especially the blocks built between the 1960s and 1980s, the original three- and four-foot side-yard gates were almost never intended to carry an automatic opener. But somewhere along the way, homeowners widened them for boat trailers, fifth-wheels, and work rigs. That means a Ghost Controls swing operator in Fontana is frequently bolted to a gate that’s heavier, wider, and more twisted than the operator was ever rated for, on posts that were sized for a gate half that span.
So when a Ghost Controls arm keeps faulting here, the answer isn’t always a new motor. It’s often new posts set deeper in concrete, a re-hung gate that swings true, and then a proper limit reset on the operator. We’ve seen this exact pattern on a side-yard gate off a residential street in 92335, where a homeowner’s single-swing Ghost Controls operator kept stalling halfway and reversing every afternoon. Our tech found the widened RV-access gate had dropped on a rotting post, overloading the arm. We set new posts, re-hung and realigned the gate, then reset the operator’s limits and swapped a tired backup battery. It’s been cycling cleanly through the summer heat since. Gates don’t fail overnight, they just finally run out of patience.
Ghost Controls Models & Products We Service in Fontana
We work on the full Ghost Controls lineup: Heavy-Duty Single Swing operators (TDS series), Dual Swing double-gate kits, solar-ready residential swing arms, and the accessory line, including keypads, remotes, safety sensors, and backup batteries. For repairs, we fit OEM Ghost Controls control boards, arms, batteries, and receiver units where the system’s compatibility depends on it. For hinges, posts, and mounting hardware, we spec aftermarket parts that hold up better under Fontana’s heat and irrigation exposure. And we stock the common Ghost Controls parts locally, which shortens turnaround and means fewer return visits. If you need a broader look at what we offer, see our Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Fontana
Ghost Controls gate repair in Fontana typically runs $110 to $190 for service-call diagnosis, $145 to $340 for battery-backup replacement and limit-switch recalibration, and $180 to $450 for control-board or receiver-board replacement on a swing system. Hinge replacement and post re-setting on a widened side-yard gate usually lands between $300 and $850, depending on post condition, gate width, and concrete work. A full Dual Swing operator install, including two arms, control board, keypad, and remotes, generally starts around $1,100 and goes up with gate weight and span. Every quote on Ghost Controls work is given and agreed before any work starts, so there’s no invoice bigger than the number you approved. Call (877) 752-1896 and we’ll walk through your gate, your operator, and an exact number.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well, and we also provide Ghost Controls service in Bloomington. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Fontana
It’s almost always the battery, not the motor. The backup battery bank inside the control box heat-soaks when Fontana pushes triple-digit temperatures, loses capacity, and the gate stops cycling in the late afternoon when the sun has been cooking the post all day. We load-test the panel output and battery bank, replace the dead cells with correctly sized heat-rated backups, and the gate cycles again. If you’re seeing this pattern, call (877) 752-1896 and we’ll confirm before you buy a motor you don’t need.
Because the gate leaf has probably dropped or sagged on its posts, and the operator’s resistance sensing sees that as an obstruction. In Fontana’s older 92335 and 92336 tracts, the original side-yard gates were widened for RV and trailer access, and the posts underneath them weren’t. The fix is new posts, a re-hung gate, and then a limit reset on the operator. We handle the full repair, from the motor to the hinge.
Yes. We fit OEM Ghost Controls control boards, receiver boards, arms, and batteries as standalone replacements. You don’t need a whole new kit because one board failed. We diagnose the specific component, replace it with the correct Ghost Controls part, and leave the rest of your system alone. Estimates are free, and the price is agreed before we order anything.
We do. The newer 2000s and 2010s subdivisions in south Fontana tend to have builder-grade vinyl and steel gates, often with HOA-mandated matching iron, and Ghost Controls operators on them face the same heat and dust cycles as the older tracts. The gate stock is different, but the operator faults are similar. We cover all four Fontana ZIP codes: 92334, 92335, 92336, and 92337. For a broader look at coverage, see our Fontana service area page.
No. Baron Gate Repair is an independent gate repair company. We fix Ghost Controls operators regularly and know their boards, limit-switch behavior, and battery quirks from field experience, but we’re not sponsored, authorized, or endorsed by Ghost Controls. That independence means we tell you honestly when a repair is worth doing and when a gate itself needs work first. If you’re weighing repair against replacement, call (877) 752-1896 and we’ll give you a straight answer on the phone.
Service Areas Near Fontana
Baron Gate Repair serves Fontana and the surrounding Inland Empire communities, including Corona, Norco, Eastvale, Jurupa Valley, and Home Gardens. If you’re just outside Fontana proper, we’re still close by. See our Ghost Controls service in Lake Forest and Ghost Controls service in Tustin pages for coverage farther south.
Book Your Ghost Controls Service in Fontana Today
If your Ghost Controls gate is stalling, reversing, or dead, call (877) 752-1896. We’ll schedule a service call, diagnose the actual problem, and quote the repair before any work begins. Same-day service is available when the schedule allows.
Written by Nolan Briggs, Owner at Baron Gate Repair, serving Fontana’s gates and Ghost Controls operators with specialist repair and installation.