Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fontana, CA
Fontana gate installation and repair calls usually come down to two things we see everywhere in this city: aging ironwork from the 1960s through 1980s tract-home boom, and newer builder-grade gates in south Fontana subdivisions that were never quite built for triple-digit summers. We’re Baron Gate Repair, a gate-only specialist serving Fontana since 2017. Whether it’s a sagging chain-link side gate widened for RV access in 92335 or a sliding driveway gate in 92336, we work on the brand you already have and fix it correctly the first time. Call (877) 752-1896 for a free estimate.
Why Fontana Homes Are Different
Fontana’s housing stock runs in two distinct waves, and they fail differently. The older core in 92335 and 92336 is predominantly 1950s to 1980s single-story stucco tract homes on block walls. The original gates here were often ornamental wrought iron, a legacy of Fontana’s Kaiser Steel era when ironwork was cheap and local. Decades of inland heat and Santa Ana dry winds have done their work: weld points rust from winter rain, hinges seize, paint chalks away, and the posts themselves lean as the sandy soil shifts. A technician rolling through these neighborhoods is as likely to be rewelding a 40-year-old custom iron gate as swapping an opener.
South Fontana is a different animal. The 2000s and 2010s subdivisions in 92336 and 92337 came with builder-grade vinyl and steel gates, often HOA-mandated to match the tract’s look. These gates are lighter but the hardware is thinner, and the operators are often entry-level units that struggle through a full Fontana summer. We also see a distinctly Fontana pattern in the older neighborhoods: homeowners widened their original 3-foot side-yard gates for RV and trailer access, which means a repair call here is frequently a re-hang job with new posts rather than a simple hinge fix. That combination of styles, eras, and weather is what makes local knowledge matter.
Styles & brands we work with
Our Main Fontana Services
Most Fontana homeowners call us for one of two reasons: a gate that won’t open or close properly, or an automated system that stopped responding. Here’s what each involves locally.
Gate Repair in Fontana
Repair calls in Fontana span everything from re-hanging a sagging side-yard gate in the older tracts to replacing a bent sliding-gate wheel on a southside driveway. The inland heat and dry winds accelerate hinge wear, warp wood gates, and rust iron at the weld points. We diagnose the full gate, from the motor to the hinge, and carry the parts to fix it in one visit whenever possible. Read more on our Gate Repair in Fontana page.
Electric Gate Repair in Fontana
Electric gate failures in Fontana often trace back to control boards cooked by heat or safety sensors knocked out of alignment by winds. We handle the electronics that general repairers misdiagnose: loop detectors, photo eyes, control boards, and the operator itself. Whether it’s a Mighty Mule on a ranch gate or a DoorKing on a commercial access point, we service the brand already installed. See our Electric Gate Repair in Fontana page for specifics.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fontana
Installing a gate in Fontana means matching the house and the era, not just dropping in a stock panel. In the older 92335 and 92336 neighborhoods, we’re often replacing a hand-widened side gate that never quite worked right, or putting a new motorized driveway gate on a property that’s had a manual swing gate since the 1970s. In south Fontana’s newer subdivisions, we’re frequently upgrading builder-grade vinyl gates to sturdier steel or iron that can take the summer sun without warping. Whatever the job, we quote the full price before any work starts and install from the hinge posts to the operator. For a deeper look at the service, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
A manual gate you’re tired of opening by hand, especially on a wide driveway or one you use multiple times a day, is the biggest signal it’s time to automate.
What it costs in Fontana
Automatic gate installation in Fontana typically runs $2,000 to $7,000 depending on the gate size, operator brand, and whether a new power run is needed.
How we do it
We set the gate and posts, mount the operator matched to the gate’s weight and width, run the low-voltage and power wiring, install safety edges or photo eyes, and program remotes and keypads.
Driveway Gate Installation
Signs you need it
A driveway that’s never had a gate, or one with a gate so rusted or undersized that re-hanging it costs nearly as much as starting fresh, calls for a new install.
What it costs in Fontana
Driveway gate installation in Fontana typically runs $2,000 to $7,000 depending on gate width, material (steel, iron, or vinyl), and whether it’s a swing or sliding design.
How we do it
We measure the opening, set steel posts in concrete, hang the gate to clear the grade, then add an operator if you want it automated, with all hardware rated for the gate’s weight and Fontana’s wind loads.
Sliding Gate Installation
Signs you need it
A driveway that slopes upward from the street or lacks room for a gate to swing inward without hitting a car or wall is the standard case for a sliding gate.
What it costs in Fontana
Sliding gate installation in Fontana typically runs $2,500 to $8,000 depending on the length, track or cantilever design, and the operator you choose.
How we do it
We set a concrete track or cantilever rollers, build or assemble the gate panel, hang it level, and mount a slide operator with the correct limit and safety settings.
What Gate Installation Costs in Fontana
| Item | Typical range in Fontana |
|---|---|
| Automatic gate installation | $2,000 – $7,000 |
| Driveway gate installation | $2,000 – $7,000 |
| Sliding gate installation | $2,500 – $8,000 |
Prices in Fontana push upward when the existing posts are too small or rusted and need replacing, when a longer power run is required from the panel, or when an HOA requires a specific iron design. We quote before we start; the price you approve is the price you pay.
How long does gate installation take in Fontana?
Most standard driveway gate installations in Fontana are completed in one to two days, including post setting, gate hanging, and operator programming. Custom ironwork or a concrete track for sliding gates may add a day. Call (877) 752-1896 for a schedule based on your exact setup.
Do I need an HOA approval for a gate in Fontana?
Many south Fontana subdivisions in 92336 and 92337 have HOA design rules for gates, especially front-facing driveway gates. We provide the material and design specs your HOA needs, and we build to the approved look. For city permits, we’ll tell you what Fontana requires for your project at the estimate.
Brands We Service in Fontana
We work on the brand you already have. In Fontana, that means a lot of LiftMaster and Mighty Mule operators on residential gates, DoorKing on commercial and access-controlled properties, and Elite on mid-range slide and swing systems. We stock common boards, remotes, safety edges, and hinge hardware locally, and we can usually have a diagnosed part in hand within a day or two. From the motor to the hinge, see our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Gate repair (re-hang, hinge, post) | $100 – $600 |
| Gate repair (weld or ironwork) | $150 – $900 |
| Automatic gate installation | $2,000 – $7,000 |
| Driveway gate installation | $2,000 – $7,000 |
| Electric gate installation | $2,000 – $7,000 |
| Sliding gate installation | $2,500 – $8,000 |
| Electric gate repair (control board, loop, sensor) | $150 – $1,200 |
| Gate operator replacement | $900 – $1,800 |
Fontana prices climb when rusted 40-year-old posts have to be cut out and replaced, when a gate was widened years ago and the geometry is off, or when an HOA mandates a specific iron pattern. What we quote is what you approve before any work begins, so there’s no surprise on the invoice.
Neighborhoods We Serve in Fontana
We cover all of Fontana’s ZIP codes: 92334, 92335, 92336, and 92337. Most neighborhoods we can reach the same day for emergency repair calls, though installations are scheduled for a measured date.
- Southridge
- Rancho Fontana
- Northgate
- Walnut Village
- Summit Heights
Service Area – Cities Near Fontana
Baron Gate Repair works throughout the surrounding Inland Empire communities, so if you’re just outside Fontana we can still get to you. We regularly serve Bloomington, CA, Glen Avon, CA, Pedley, CA, and Sunnyslope, CA. Call (877) 752-1896 to confirm we cover your street.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
For a gate that’s stuck open or won’t close, we aim for same-day dispatch in most Fontana neighborhoods and can usually schedule within 24 hours for non-emergency repairs. Installation dates are set at the time of the estimate. Call (877) 752-1896 for today’s availability.
Most standard residential gate installations in Fontana do not require a city building permit, but if your gate includes a new electrical run or is on a commercial property, a permit may apply. We tell you exactly what’s needed when we measure. Your HOA, if you have one, may have its own approval step.
Yes. That mix is what Fontana throws at us daily: a rusted 1970s wrought-iron side gate in the morning and a builder-grade LiftMaster opener in the afternoon. We’re a gate specialist, not a generalist, so both ends of that spectrum are our everyday work.
If your gate is sagging, stuck, or dead at the opener, call Baron Gate Repair at (877) 752-1896 for a free estimate. We’ll tell you what’s wrong, what it costs to fix, and we’ll have the parts on hand when we come out. From the motor to the hinge, diagnosed and fixed in one visit.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Lucia Guzman"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Jeff Quinn"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Mark Thompson